Industrial Office Container
  • Features
  • Technical Data
  • Application
This office container is consist of several containers. Combined together, cancel the neighboring wall panel. The huge office space come out. The office area should be bright enough. So on the ceiling installed two lights per container. The office room should be quiet, protecting the noise from the outer space. So we design the wall panel to be thick enough. To be sound proof. During the winter the inner space should be warm enough. That is not a problem anymore. Thick wall panel solve that, as the sandwich panel has glass wool insulation layer.
Flat pack design: Wall panel, door, corner post and accessories are packed between the roof and floor. Two to six container houses can be packed into the same dimension as international standard shipping container`s, meeting land transportation demand, thus reduce the cost of transportation by a large margin. Four containers can be packed into one bundle, same dimensions as a twenty foot container. Save the transport space above 70%. This packed method is especially suitable for nonstandard modular house;
Environmental, Efficient and Energy saving: Efficient heat and sound insulation, well sealing property, comparing with conventional residence save energy above 50%. The whole building material is recyclable.
Green and Healthy: Consist of healthy, environmental and secure material. Meet every building standard.
Low cost: High efficient manufacturing in factory contributes to low cost. Low energy consumption and maintenance, better than traditional residence on performance, using and quality.
structure unit: prefabricated parts, strong enough to resist the earthquake.
Combination: Prefab units can be combined side by side or end with tail, also can be stacked with each other (highest 4 floors). Thus can satisfy customer`s various sizes, shapes, and application demands.
The layout of the office building:

Item

Description

Structure

Flat pack

·       Cold rolled steel structure with corner casts and forklift pockets 90x256x2050mm

·       Available size,  8ft x 10ft, 8ft x 16ft, 8ft x 20ft, 8ft x 24ft, 8ft x 30ft, 10ft x 20ft

Wall panel

Exterior Cladding

  • 0.5mm thick corrugated or flat galvanized coated steel sheet

Insulation

  • 60mm, 70mm, 80mm, 100mm

Internal Cladding

·         Laminated E1 – Emission Valued 9mm thick chipboard;

·         White 12.7mm thickness Glass – Magnesium Board MgO;

·         Parallel compressive strength = 18.1 MPa;

·         Formaldehyde emission ≤ 0.1mg/100g;

·         Water expansion ratio = 0.2%;

·         Low smoke and non-flammable;

·         Flammability class A1 – non-combustible;

·         Smoke density: low smoke emission;

·         0.5mm thick galvanized and coated color steel sheet.

floor

Floor Steel frame

·         3mm thick cold rolled & welded steel profiles;

·         Insulation Thickness: 10mm PU / 100mm mineral wool;

·         Subfloor: 0.5mm thick, galvanized steel sheet;

·         Floor Board: 18mm magnesium(water resistant v 100);

·         The board complies with the emission value E 1;

·         Parallel compressive strength = 35.7 MPa;

·         Formaldehyde emission ≤ 0.4mg/100g;

·         1.5mm thick vinyl sheet;

·         Flammability class B1 – hardly combustible;

·         Smoke density class Q1 – low smoke emission;

·         Welded seams.


Fiber cement floor

·         Density: 1.26kg/m3 K= 0.18W/m*k;

·         Waterproof, moisture content = 0.13%/m2

·         Formaldehyde emission = 0.2 mg/ 100g;

·         Deformation, parallel to the bending elasticity = 6055MPa


18mm thick marine grade floor

·         Parallel compressive strength = 88MPa;

·         Formaldehyde emission ≤ 0.4mg/100g;

·         Deformation, parallel to the bending elasticity = 8030MPa;

·         Waterproof, moisture content = 6.0%/m2


Insulation

Mineral wool

·         Density : 40kg/m3 – 120 kg/m3(120kg/m3 = 0.25w/m2*k)

·         Flammability class A – non-combustible;

·         Smoke density class Q1 – low smoke emission;

·         Certification : CE & GL;

·         Temperature adjustment – 50c & 120c. K= 0.044W/m*k;

·         Water Ratio ≤ 0.5%;

·         Hygroscopic coefficient ≤ 5% & ≥ 98%.


PU Foam

·         Density : 30kg/m3 – 40 kg/m3 (40kg/m3 = 0.044W/m2*k)

·         Flammability class B1 – non-combustible;

·         Smoke density class – low smoke emission;

·         Compressive strength > 150MPa;

·         Water vapor absorption ≤ 6.0ng(Pa*m*s );

·         Hygroscopic coefficient ≤ 4%.


Glass wool

·         Density : 16kg/m3 – 24kg/m3

·         Flammability class A – non-combustible;

·         Smoke density classQ1 – low smoke emission;

·         Coefficient ≤ 4%


roof

Roof Steel Frame

  • 4mm thick cold rolled & welded steel profiles

Roof Cover

  • 0.5mm thick galvanized sheet & double folded in the roof middle;
  • Insulation Thickness:     Ceiling Panels:

100mm    9mm chipboard(V20), White(Usual);

50mm   50mm Steel Sandwich panel(Option 1);

100mm 12.7mm Glass Magnesium Board(Option2);

Corner posts

  • 4mm thick cold rolled & welded steel profiles, Screwed to the floor base frame and roof frame.
  • 3mm thick cold rolled & welded steel profiles, Screwed to the floor and roof frame.

Door

  • Right or left hand hinged;
  • Inward or outward opening;
  • Steel frame with triangular wrap-around sealing;
  • Door blade with galvanized steel sheets on both sides;
  • Insulated with honeycomb;
  • Aluminum or Steel type;
  • Regular size: 870*2040mm, 870*1995mm.

Window

·       PVC frame with insulated glazing and integrated Aluminum roller shutters;

·       Color: white;

·       Tilt & turn mechanism or sliding;

·       Regular size: 800*1100mm.

Electrical

·     CE,AS/NZ,UL.

Office: Reception, Meeting room, Office area. Manager office room and so on.
Top
Product Catalog